English

Cable marking durability test system according to BS-ISO 6722 and ISO 19642

Cable marking durability test system according to BS-ISO 6722 and ISO 19642

20-11-2026

A system designed to verify the resistance and legibility of electrical cable markings following a combination of chemical and mechanical actions, in accordance with BS-ISO 6722 and ISO 19642 standards.

 

The test involves immersing the cable sample in an oil bath for 20 hours, followed by a 30-minute draining period. The sample is then subjected to a back-and-forth rubbing action between two felt pads, under an applied force of (10 ± 1) N. At the end of the test, all markings on the cable must remain clearly legible.

 

By applying LEAN PRODUCTION principles, SIF has developed a compact, integrated system that incorporates all the components required to perform the test into a single structure.

Key features:

 

-aluminium profile frame designed to integrate all the components required for the test

-calibrated weight with hook, suitable for force measurement using a digital dynamometer

-low-friction guide rails allowing the weight to move freely

-interchangeable felt pad kit

-thermostatically controlled oil bath, equipped with a temperature controller to maintain the set temperature and a protective lid

-magnet-mounted clamps to hold the cable during both the test and the draining phase

-adjustable cable suspension system to set the cable's immersion and suspension height in accordance with the standard. the inclined design allows the cable to drain without contaminating the plates and magnets

 

 

A complete solution designed to optimize workspace, simplify testing operations, and ensure convenience, reliability and ease of use throughout the testing process.

 

 

 

 

 

Request more information now!

Just email us at sales@sifmdc.com